The ProPhase TD Dense Phase Pump is a batch transfer vessel, similar in concept to the Standard Dense Phase Pump, with improved capability for large tonnages and longer distance conveying, designed for fine fluidizable materials.
Throughput rates increased to 250t/h and distances up to 1500 meters with optimum conveying over 600m. Systems can operate at temperatures up to 480ºC.
The ProPhase TD Pump has the lowest air consumption, per ton conveyed, in the range and is designed to minimize material degradation, by utilizing the slow transfer velocities of dense phase conveying.
The inherent simplicity of the ProDV Dome Valve, the only moving part in the Dense Phase Pump system ensures the overall system reliability and low maintenance operation.
Standard Fabrication
The ProPhase Pump assemblies are supplied complete with ProDV Dome Valves on the inlet, outlet and vent positions, electro-pneumatic controls, air management module and instrumentation, pre-wired and pre-piped, ready for connection to electrical supplies and compressed air, nitrogen or CO2. Connection to a suitable vent pipeline is also required.
- Vessels can be manufactured to most international pressure vessel codes and designed for a working pressure of 7 Barg standard. Special designs are available on request.
- Standard vessel material is Carbon-Steel, with coatings and Stainless-Steel grades available on request
- Pumps are free-standing, special foundations are not required.
- Available with PhasiQ controller or can be controlled by plant PLC
- ATEX-compatible versions are available on request
We’re there for you
Partnership for us means always being on hand to support you whenever and wherever you need us. With our global network of locations and expert partners, we make sure we are always right by your side.
